Dev-Team is ready to release RedSn0w 0.9.7 with untethered iOS 4.2.1 jailbreak




Good news everyone. DevTeam recently posted a tweet where they inform us that they will soon release a new version of Redsn0w utility for Windows. It will be an untethered jailbreak for iOS 4.2.1 using the Monte iOS 4.1 technique.

redsn0w 097 jb Dev Team is ready to release RedSn0w 0.9.7 with untethered iOS 4.2.1 jailbreak

In fact, Apple still provides 4.1 ipsw and this could be used to jailbreak.

In addition, the team warns that Windows version will be very slow because the program uses the filesystem instead of RAM.

redsn0w 097 jb 2 Dev Team is ready to release RedSn0w 0.9.7 with untethered iOS 4.2.1 jailbreak

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Beta-version Of Jailbreak For iOS 4.2.1 Released




betatest Beta version Of Jailbreak For iOS 4.2.1 Released

The iPhone Dev team has just released the second beta of their untethered RedSn0w jailbreak (the first beta has been released few hours ago and has more bugs).

New jailbreak is called “Jailbreak Monte”, as it uses new “backup method”. The iPhone Dev Team warns that their beta-version is not a general release and you should back up all your media before using it. There are also other limitations and bugs:

  • The beta is limited to iPod touch 4G, iPad and iPhone4;
  • The team asks not to participate in testing if you rely on the ultrasn0w carrier unlock;
  • The bluetooth functionality is disabled due to sandbox problem;
  • iPod player works only on iPod touch 4G;

To use this version of jailbreak Cydia should have your 4.2b3 SHSH blobs saved on file and following:

“You must already have the usbmuxd software installed and running on your Mac (this requirement will eventually go away too). The correct invocation of the relay is just as that page says: “./tcprelay.py -t 22:2222”.  If the relay isn’t installed or running correctly by the time the redsn0w ramdisk has started, you’ll need to restore to stock FW again to try it again. Please test it beforehand to save yourself some time!”

Now, if you’re ready to apply this version of jailbreak, upi can download redsn0w 0.9.7 beta here.

After downloading and applying just select “Jailbreak Monte” to try out the untether.

The iPhone Dev team asks to test it after a fresh restore in order to keep track of the variables involved. Be careful!

By the way, iPodUplink has posted a video where you can see how to jailbreak your device with the latest version of redsn0w:

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Step-by-step Tutorial: How to Jailbreak and Unlock Your iPhone 3GS Using RedSn0w 0.9.6b5 (Windows) [iOS 4.2.1]




UPDATE: Please think first, before you do something.

UPDATE2: If you have 05.13 baseband or lower – do not update to 4.2.1, use PwnageTool to create custom firmware!

This is step-by-step instructions on how to jailbreak and unlock your iPhone 3GS on iOS 4.2.1 firmware using RedSn0w 0.9.6b5 for Windows.

For iPhone 3G use this tutorial.

If you have an iPhone 3GS with the new bootrom you will only be able to perform a tethered jailbreak at this time. This means you will need Redsn0w’s assistance to boot into your jailbroken device.

IMPORTANT FOR UNLOCKERS
During this process you can update your baseband to the 06.15 version. If you are on 05.14 or 05.15 or higher you will need to do this to unlock. You do not need to do this for jailbreak only. Please read the following very carefully before deciding whether to do this.

  1. There is no way to come back down from baseband 06.15, and there’s no hiding the baseband version from Apple. You’ll be voiding your warranty in a very obvious way.
  2. If some future baseband comes out with a critical fix, you won’t be able to update to it if it remains down in the 05.xx sequence (then again, you wouldn’t update to it if you wanted to keep your unlock anyway).
  3. Starting with FW 4.2.1 if you have 06.15 on your iPhone you won’t ever be able to restore to stock firmware (it will fail). You’ll need to only restore to custom IPSWs (then again, if you’re unlocker you should already be doing that).

Don’t update to 06.15 if you don’t need to, you can just jailbreak without unlocking using this tutorial! Only update baseband if you need the unlock and you’re stuck on baseband version 05.14 or 05.15, and you’re willing to assume the above risks. You can find out your baseband version in Settings -> General -> About -> Modem Firmware.

Those with an unlockable baseband and on a lower firmware should use PwnageTool instead to update without upgrading your baseband.

Step One
Create a folder on your desktop called Pwnage

Download RedSn0w from here or here. Save it in the Pwnage folder. Likewise, download the latest 4.2.1 firmware from below and place it in the same folder.

iPhone 3G iOS 4.2.1: iPhone2,1_4.2.1_8C148a_Restore.ipsw

Extract the redsn0w executable from the RedSn0w zip file into the same folder.
redsn0w 096b5 s1 500x358 Step by step Tutorial: How to Jailbreak and Unlock Your iPhone 3GS Using RedSn0w 0.9.6b5 (Windows) [iOS 4.2.1]

Step Two

***If you are already on iOS 4.2.1 you can skip this step.

Connect your iPhone to the computer and launch iTunes. Create a backup, since all your data on iPhone will be erased.

Read the rest of this entry >>>

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

RedSn0w 0.9.6b4: jailbreak for iOS 4.2.1 released




Redsn0w 096B4 RedSn0w 0.9.6b4: jailbreak for iOS 4.2.1 released

DevTeam worked hard for the last several hours and released jailbreak tool for iOS 4.2.1. It is redsn0w 0.9.6 b4.

As usual we remind all ultrasn0w unlockers please stay away from this official firmware. Wait for the ability to create custom 4.2.1 IPSWs that don’t update your baseband!

New redsn0w 0.9.6 b4 uses limera1n exploit and will successfully jailbreak all devices. The only problem is that it is a tethered jailbreak, which means you will have to plug it to a computer and rerun redsn0w on every reboot. This so called tethered or semi-tethered jailbreak. This condition applies to iPhone 3GS (new bootrom), iPhone 4, iPad, iPod touch 2G (MC model), iPod touch 3G and iPod touch 4G. Hackers are working hard to create untethered jailbreak for these devices. To use future untethered jailbreak you need to save SHSH keys for iOS 4.1 using TinyUmbrella utility or directly in Cydia.

Old devices like iPhone 3GS (old bootrom), iPhone 3G and iPod touch 2G (non-MC model) can be jailbroken-untethered right now using this latest version of RedSn0w.

You can download RedSn0w 0.9.6 b4 here.

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

BlackRa1n-fix For iTunes 9.1 Is Released




iTunes crashed

Yesterday iTunes update was found to have issues with those of iPod Touches and iPhones that were tethered jailbroken with blackRa1n. If you have one of these, you will be unable to rejailbreak your device after rebooting it with blackra1n. The problem is being experienced only by Windows users. iH8Sn0w has an explanation:

“Blackra1n hooks to the dll that has different offsets of what it is actually looking for”.

To solve the problem iH8Sn0w released a blackra1n fix for a new version of iTunes. It’s named BlackBreeze and it supports 32bit + 64bit Windows versions and can be downloaded here.  Please note that this fix is not an official update from Geohot. You can also try to replace new iTunes dll-files with the old ones or install  iTunes 9.0.3. The latter is available here (don’t forget to uninstall the current version and reboot before the installing of another one).

Redsn0w reportedly works fine with the new iTunes 9.1. MuscleNerd twitted:

 BlackRa1n fix For iTunes 9.1 Is Released

, , , , , , , , , , , , , , , , , , , , , , , , , ,