RedSn0w updated to version 0.9.15b3




redsn0w 0915b3 312x400 RedSn0w updated to version 0.9.15b3

The iPhone Dev-Team has announced an updated version of RedSn0w and an upcoming update to UltraSn0w for iOS 6 compatibility.

Version 0.9.15b3 fixes the redsn0w “error 2601” that Windows users were seeing using the Restore button. It also fixes a related Windows iTunes error 14 for stitched files. Note that if you have a baseband, you should probably avoid stitching and simply use redsn0w’s native Restore (not iTunes).

Those lucky recipients of new iPad minis and iPad4s on Friday can use this redsn0w to save your 6.0 blobs off to Cydia. First connect your new device and turn it on, then use redsn0w’s Extras->SHSH Blobs->New and point it at the 6.0 IPSW.

Expect an ultrasn0w compatibility update for iOS 6.0 by Friday (mostly useful for 3GS old-bootrom users who are currently enjoying the untethered 6.0 jailbreak!). Same baseband support as with 5.x.

Thanks to @iamgolfy for helping test the 2601 Windows fix!

You can download the latest version of RedSn0w from here.

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

RedSn0w 0.9.14b2 improves 06.15 downgrade for iPhone 3GS/3G




redsn0w 0914b2 295x400 RedSn0w 0.9.14b2 improves 06.15 downgrade for iPhone 3GS/3G

The iPhone Dev-Team released RedSn0w 0.9.14b2 with improved algorithm for baseband downgrade from the iPad’s 06.15 baseband to 05.13 on the iPhone 3GS and iPhone 3G. The 06.15 baseband was used by many users to unlock their device. Now it is possible to to get back true GPS and an ultrasn0w unlock.

You can download RedSn0w 0.9.14b2 here.

Here is additional info from DevTeam:

Typically you’d have the 06.15 baseband if you unlock with ultrasn0w but updated your iPhone baseband past 05.13.04. With this new capability, you can now downgrade specifically from 06.15 to 05.13.04 (even if you never had 05.13.04 on that device before). This gives you the best of both worlds: ultrasn0w compatibility and a normal iPhone baseband with full GPS and the ability to use stock IPSWs again.

The revised steps are:

  1. Connect your iPhone in normal mode, then click “Jailbreak” after redsn0w identifies its model and BB version (you needn’t pre-select the IPSW anymore).
  2. Choose the “Downgrade from iPad baseband” option (you needn’t worry about de-selecting Cydia anymore).
  3. Do a controlled “slide to power off” shutdown of your phone and proceed through the normal DFU ramdisk steps.

After the ramdisk gets launched and you see the Pwnapple running on your iPhone, you’ll eventually get to the “Flashing Baseband” step. THIS STEP TAKES A VERY LONG TIME to complete and there won’t be any feedback while its running. Please just let it be for the next 3-8 minutes! When the ramdisk has done its job it will reboot the phone on its own.

For those who are wondering if you can update your 3G or 3GS to 06.15 solely for the purposes of downgrading to 05.13.04, the answer is “yes” for 3G owners, and “maybe” for 3GS owners. The iPad baseband is not compatible with 3GS units manufactured week 34 of 2011 or later. If you have an iPhone3GS and if digits 3-5 of its Serial Number are 134 or later (xx134…), then you should NOT try to install the 06.15 baseband on your 3GS! It will brick your radio, preventing both the downgrade from working and normal iPhone software from using it as a phone! Be warned!

Update #1: If you’re still using ultrasn0w after going down to 05.13.04, many people have reported that re-installing Mobile Substrate and/or ultrasn0w fixes crashes and “No Signal”.

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

RedSn0w 0.9.14b1 Released: 06.15 Downgrade for iPhone 3GS/3G




redsn0w 0914b1 313x400 RedSn0w 0.9.14b1 Released: 06.15 Downgrade for iPhone 3GS/3G

The iPhone Dev-Team released RedSn0w 0.9.14b1 that can perform a baseband downgrade from the iPad’s 06.15 baseband to 05.13 on the iPhone 3GS and iPhone 3G. The 06.15 baseband was used by many users to unlock their device. Now it is possible to to get back true GPS and an ultrasn0w unlock.

You can download RedSn0w 0.9.14b1 here.

Here is additional info from DevTeam:


Read the rest of this entry »

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

RedSn0w updated to support iPhone 4S and iPad 2 on iOS 5.0.1




redsn0w 0910b7 325x400 RedSn0w updated to support iPhone 4S and iPad 2 on iOS 5.0.1

The iPhone Dev-Team has updated RedSn0w to jailbreak the iPhone 4S and iPad 2 on iOS 5.0.1.

Version 0.9.10b7 of redsn0w adds a collection of useful features: It finally implements the corona-A5 jailbreak for iPhone4S and iPad2 devices still at 5.0.1. It can also re-install that jailbreak for those who accidentally uninstalled the untether. When stitching an IPSW, it can now grab your blobs directly from Cydia. It now shows a lot more info about your device (for instance, whether your iPhone3G has the vulnerable baseband boot loader, or whether your iPhone3GS has the old exploitable bootrom. (And the next new feature to be added will be built-in restore support, to provide an alternative to iTunes restores.)

Previously you needed to use Absinthe to jailbreak the iPhone 4S and iPad 2.

You can download the new version of RedSn0w from here.

We will update our tutorials soon.

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Dev-Team Releases RedSn0w 0.9.10b5 With iBooks Fix




redsn0w 0910b5 325x400 Dev Team Releases RedSn0w 0.9.10b5 With iBooks Fix

The iPhone Dev-Team has released RedSn0w 0.9.10b5 which includes another fix for iBooks DRM by planetbeing.

As always, you can simply run the new redns0w over your current jailbreak, just make sure to uncheck Cydia. To fix iBooks and launchctl errors you can also simply install new version of Corona from Cydia.

You can download the new version of RedSn0w from here.

Our step-by-step tutorials for untethered jailbreak using redsn0w 0.9.10:


Read the rest of this entry »

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,