RedSn0w 0.9.14b2 improves 06.15 downgrade for iPhone 3GS/3G




redsn0w 0914b2 295x400 RedSn0w 0.9.14b2 improves 06.15 downgrade for iPhone 3GS/3G

The iPhone Dev-Team released RedSn0w 0.9.14b2 with improved algorithm for baseband downgrade from the iPad’s 06.15 baseband to 05.13 on the iPhone 3GS and iPhone 3G. The 06.15 baseband was used by many users to unlock their device. Now it is possible to to get back true GPS and an ultrasn0w unlock.

You can download RedSn0w 0.9.14b2 here.

Here is additional info from DevTeam:

Typically you’d have the 06.15 baseband if you unlock with ultrasn0w but updated your iPhone baseband past 05.13.04. With this new capability, you can now downgrade specifically from 06.15 to 05.13.04 (even if you never had 05.13.04 on that device before). This gives you the best of both worlds: ultrasn0w compatibility and a normal iPhone baseband with full GPS and the ability to use stock IPSWs again.

The revised steps are:

  1. Connect your iPhone in normal mode, then click “Jailbreak” after redsn0w identifies its model and BB version (you needn’t pre-select the IPSW anymore).
  2. Choose the “Downgrade from iPad baseband” option (you needn’t worry about de-selecting Cydia anymore).
  3. Do a controlled “slide to power off” shutdown of your phone and proceed through the normal DFU ramdisk steps.

After the ramdisk gets launched and you see the Pwnapple running on your iPhone, you’ll eventually get to the “Flashing Baseband” step. THIS STEP TAKES A VERY LONG TIME to complete and there won’t be any feedback while its running. Please just let it be for the next 3-8 minutes! When the ramdisk has done its job it will reboot the phone on its own.

For those who are wondering if you can update your 3G or 3GS to 06.15 solely for the purposes of downgrading to 05.13.04, the answer is “yes” for 3G owners, and “maybe” for 3GS owners. The iPad baseband is not compatible with 3GS units manufactured week 34 of 2011 or later. If you have an iPhone3GS and if digits 3-5 of its Serial Number are 134 or later (xx134…), then you should NOT try to install the 06.15 baseband on your 3GS! It will brick your radio, preventing both the downgrade from working and normal iPhone software from using it as a phone! Be warned!

Update #1: If you’re still using ultrasn0w after going down to 05.13.04, many people have reported that re-installing Mobile Substrate and/or ultrasn0w fixes crashes and “No Signal”.

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

RedSn0w 0.9.9b6 released: iOS 5 jailbreak for Windows and fixed location services for 3GS




redsn0w 099b6 325x400 RedSn0w 0.9.9b6 released: iOS 5 jailbreak for Windows and fixed location services for 3GS

The iPhone Dev-Team released jailbreak utility RedSn0w 0.9.9b6 for both Windows and Mac users. The new version offers full iOS 5 jailbreak support for Windows and fixes Location Services issue for iPhone 3GS devices running the 06.15 baseband. This is still a tethered jailbreak for iPhone 4, iPhone 3GS, iPad 1, iPod Touch 3G and iPod Touch 4G:

We’ve released version 0.9.9b6 of redsn0w, with both a functional fix and cosmetic fix for iOS5 jailbreakers. For iPhone3GS owners with the 06.15 baseband, this redsn0w eliminates the network crash you saw when using Location Services in iOS5 (in fact, you don’t even need to disable Location Services anymore during the initial setup). The cosmetic fix is to the visual countdown you see when going into DFU mode.

It’s okay to re-run this redsn0w over an existing device jailbroken at iOS5. Just choose “Jailbreak” again and de-select Cydia (in other words, all the checkboxes will be unchecked). If you are lucky enough to have an old-bootrom iPhone3GS, please pre-select the IPSW first (redsn0w can’t yet auto-detect the FW version of your old-bootrom 3GS if it’s already been jailbroken).

Just as redsnow 0.9.9b5 the new version supports creating custom firmwares with preserving baseband (modem) version for unlock. Unfortunately right now custom firmware functionality works only with Mac version.

You can download the latest RedSn0w version here.

UPDATE:
Here are links to our RedSn0w 0.9.9 iOS 5 jailbreak tutorials:

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

DevTeam released tethered jailbreak for iOS 4.3.4




redsn0w 098b3 318x400 DevTeam released tethered jailbreak for iOS 4.3.4

The iPhone Dev-Team has released RedSn0w 0.9.8b3 which can perform a tethered jailbreak on iOS 4.3.4. This means that you will have to connect your device to a computer and run redsn0w each time you restart.

For the convenience of kernel hackers like @comex and @i0n1c, we have a new redsn0w 0.9.8b3 that supports a TETHERED jailbreak for iOS 4.3.4 on all devices that have 4.3.4 except the iPad2. The vast majority of people will want to stay back at 4.3.3 because that’s where the untethered jailbreak is! There are no new features in 4.3.4 – only fixes for jailbreak exploits.

Also, this is a good time to remind everyone (since we’re still seeing confusion about this): iPad2 owners with a baseband (3G or CDMA) cannot currently use saved blobs to go back to 4.3.3 once the signing window is closed. This is unlike every other device, so don’t be confused! iPad2 owners with basebands should stay away from all updates to maintain your jailbreak!

This jailbreak works with iPhone 3GS, iPhone 4, iPad 1, iPod Touch 3G and iPod Touch 4G. It does not work with iPad 2.

You can download RedSn0w 0.9.8b3 from here: (Mac, Windows)

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

Jailbreak iOS 5 beta 3




ios 5 beta 3 jailbreak Jailbreak iOS 5 beta 3

iOS 5 beta 3 is jailbreakable by RedSn0w 0.9.8 b1. DevTeam hacker MuscleNerd has confirmed that the RedSn0w 0.9.8 b1 jailbreak works on recently released iOS 5 Beta 3. All you have to do is to point it to a downloaded iOS 5 beta 1 firmware ipsw.

Today’s 5.0b3 can be jailbroken with last month’s redsn0w http://is.gd/6eek4Y (point it at 5.0b1 IPSW..devs only please!)

RedSn0w 0.9.8 b1 jailbreak works on all devices, exect iPad 2. This means you can get a tethered jailbreak on Windows and Mac OS for iPhone 3GS, iPhone 4, iPod Touch 3G, iPod Touch 4G and iPad 1.

You can download RedSn0w 0.9.8 b1 for Windows and Mac OS here.

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,

iOS 5 beta 2 is jailbreakable by RedSn0w 0.9.8 b1




 iOS 5 beta 2 is jailbreakable by RedSn0w 0.9.8 b1

DevTeam hacker MuscleNerd has recently confirmed that the RedSn0w 0.9.8 b1 jailbreak works on iOS 5 Beta 2. All you have to do is to point it to a downloaded iOS 5 beta 1 firmware ipsw.

5.0b2 can be jailbroken w/redsn0w from 2 wks ago http://is.gd/6eek4Y (must point redsn0w at 5.0b1 IPSW)..devs ONLY please

ios5 beta2 jail iOS 5 beta 2 is jailbreakable by RedSn0w 0.9.8 b1

This jailbreak works on all devices, exect iPad 2. This means you can get a tethered jailbreak on Windows and Mac OS for iPhone 3GS, iPhone 4, iPod Touch 3G, iPod Touch 4G and iPad.

You can download RedSn0w 0.9.8 b1 for Windows and Mac OS here.

, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,